Event Overview

2-Day CFD Multiphysics Modelling Intensive Training

Module Fundamental Course

Event Sessions

17 - 18 January 2018, 9am - 5pm


i-Math Pte Ltd

Ubi TechPark, 10 Ubi Crescent, Lobby C, #06-37, Singapore, 408564


In this 2-day course, you will receive a comprehensive overview of the COMSOL’s CFD module and how it can be coupled with other physics to perform multiphysics analyses. You will also be guided through hands-on exercises for different types of fluid mechanics problems.

By the end of the training session, you will know how to set up a CFD model, choose the right boundary conditions, select appropriate postprocessing options, and use the result visualization tools. Additionally, you will learn how to prepare your geometry or CAD file for CFD analysis and how to build a mesh that is well suited for fluid flow simulations.

A certificate will be given after you have completing the training course.


This course is intended for engineers or researchers who want to learn how to perform CFD analyses and run multiphysics simulations where fluid flow is important. It is suitable for new users of COMSOL’s CFD Module.


This course assumes some familiarity with the basic concepts of fluid flow and heat transfer. We strongly recommend that those new to COMSOL Multiphysics take 2-Day COMSOL Multiphysics Intensive Training course prior to attending this class.


Day 1, 9.00am – 5.00pm

1. Introduction to CFD

  • Find out about the physics interfaces available for different types of fluid flow
  • Multiphysics capabilities of CFD module:
  1. Built-in multiphysics flow
    • Fluid Flow & Heat Transfer
    • Rotating Machinery, Fluid flow
    • Mass Transport
  1. Multiphysics couplings with other modules
    • Fluid-Structure Interaction
    • Reacting Flow
    • Particle Tracing in Fluid Flow
    • Rotating Machinery, Multiphase Flow & Reaction Flow

2. Single-Phase Flow

  • Learn the fundamentals of performing the following single-phase flows:
    • The Creeping Flow
    • Laminar Flow
    • Turbulent Flow
  • Understanding the basic workflow of CFD modelling

Day 2, 9.00am – 5.00pm

3. Multiphase Flow

  • Learn how to use the following multiphase flow interfaces:
    • The Two-Phase Flow, Level Set
    • The Two-Phase Flow, Phase Field
    • The Three-Phase Flow
    • The Bubbly Flow
    • The Mixture Model Flow
    • The Euler-Euler Model Flow
  • Create a multiphase flow model

4. Multiphysics Flow

  • In depth understanding of how to use built-in functions for following multiphysics flows:
    • Nonisothermal Flow
    • Mass Transport
    • Rotating Machinery
  • Create a multiphysics flow model

5. Tips & Tricks

  • Meshing Techniques
  • Modelling Tips


Payment instructions will be sent to you after you have submitted the online registration form.

Course fees can be paid by the following methods:

  1. Funds Transfer
  2. Cheque


  • Training fee does not include meals.
  • Payment must be received before commencement of training courses.
  • i-Math reserves the right to cancel or postpone any course at short notice; & at its absolute discretion without assigning any reason for such cancellation/postponements. However, i-Math will ensure that every effort will be made to inform participants of the change. In the event that the applicant’s chosen course is cancelled prior to its commencement, i-Math will make a full refund of course fees already paid by the applicant.
  • Refund of fees
    If notice of withdrawal or postponement is given in writing by participant:

    • 100% refund for written notification 14 days before commencement
    • 50% refund for written notification within 14 days before commencement
    • After commencement / No show – No refund
  • Registration can be transferable if applicant is unable to attend the course. Please inform i-Math of the transfer via email: training@i-math.com.sg at least 3 working days before training date.